һ
偠tO(sh)ܷȫc(jng)\,ˮ|(zh)̎ǷdzҪġ偠toˮM̎̎ȻܟϽY(ji)ʹtڂܽȼˮ߀a(chn)gը¹ʡeԭˮˮ|(zh)Ӳ^ĵ^(q)ռ偠tˮ̎_偠tȫ(jng)\偠tЧʣL偠tʹ(ji)sԴкҪx
GZZȫԄ偠tܛˮbãµČT偠tO(sh)ӋǸ(j)ֵ҇^(q)ԭˮˮ|(zh)ӲȴcMеČO(sh)Ӌ
GZZȫԄ偠tܛˮbòòͬĽM\зʽІιpMϡAUTOTROL˾a(chn)ȫԄܛˮyṩN\еķʽĶCQa(chn)ˮ
GZZȫԄ偠tܛˮbõϵЮa(chn)ƷԝMNˮҪMˮӲȲ^8mgN/Ll\УˮӲȿɱC_0.003mgN/Lć偠tˮ˜
c
(yu)O(sh)Ӌ(yu)һGZZϵȫԄܛˮbȫMg(sh)****Qa(chn)ƷԭO(sh)Ԅӻ̸죩AUTOTROL˾ȫԄӿƆԪO(sh)\صƷʽʹO(sh)ʹóɱ¡ͣе]˵wY(ji)(gu)ĿgʹowO(sh)l(f)]****ĝ
Ҫg(sh)(sh)
Automatic softening water equipment
I. Overview
The safety and economic operation of boiler equipment is very important for water quality treatment. If the boiler feed water is not treated or treated improperly, it will inevitably scale on the heating surface, reduce the heat transfer performance of the furnace wall, increase the fuel, and cause corrosion, tube explosion and even explosion. Especially in areas where the raw water quality is hard. Popularizing boiler water treatment is of great significance for ensuring safe and economic operation of boilers, improving boiler efficiency, extending boiler life, and saving energy.
GZZ automatic boiler water softening device, is the latest specially designed for all types of boilers. It is a special design based on the hardness of raw water in most areas of China.
GZZ automatic boiler water softening device adopts different combination and operation mode, including single tank, double tank and three tank combination. The fully automatic water softening controller and control valve manufactured by AUTOTROL can provide a variety of ways to control the operation, so as to ensure the sufficient water yield of the exchange column.
GZZ automatic boiler softening water device series products can meet your requirements for various water requirements. When the total influent hardness does not exceed 8mgN/L, the residual hardness of the effluent can be guaranteed to reach the national boiler water standard of 0.003mgN/L.
II. Characteristics
GZZ series automatic softening water device with excellent design and excellent operation performance is the first generation of new imported technology (also used for original equipment automation engineering). Fully automatic control unit manufactured by AUTOTROL, USA, guarantees equipment operation. All your concerns can be eliminated based on the unique regenerative control method minimizing the cost of equipment and maximizing power. The concise and clear overall structure can fulfill the mission in your limited space, and the auxiliary main equipment can exert its maximum potential.
III. Main technical parameters